Bio Medical Waste Incinerators Manufacturers
We are pleased to introduce ourselves as M/s RRAM BUSINESS CORP. working in the engineering field designing and manufacturing all types of vending machines & incinerators, Shredders, ETPs, STPs, Furnaces, Pollution control equipment, composting machines, RO/UF/UVs and other custom based engineering equipment. We are an Iso 9001:2015 certified company and also a pioneer in waste management systems and other engineering products.
- Operating Principal:- The disposal of waste under this offer is based on the principle of the waste to destroy any degradable and
infectious material volume and mass. The design is based on the guidelines set by Central Pollution (CPCB, Delhi and is normally adopted by military installations all over the country and the world. The deficient power is supplied by electricity as against oil burners for larger installations. - System Capacity:- The offered system operates by high temperature Burners with high efficiency Dual Chambered Incinerators suitable for the disposal of all kinds of Bio Medical waste. The equipment has got solid state temperature controller with a Digital Display, Operating Switches, Indicators, and high-grade thermal insulation along with a control panel with a flue discharge system.
Bio Medical Waste Incinerators Manufacturer, Suppliers India
Rram Business Corp. is a leading manufacturer, supplier, and exporter of biomedical waste incinerators from Ghaziabad, Uttar Pradesh, India. Our medical waste incinerators are designed to meet the stringent requirements of healthcare facilities, laboratories, and other organizations involved in medical waste management.
What is bio medical waste?
Biomedical waste includes a wide range of used medical equipment. They can be potentially infectious and must be disposed of safely and responsibly. Typical bio medical waste includes syringes and needles, infusion sets, urine bags, pathological waste, culture vessels, personal protective equipment, and contaminated laboratory waste. These items simply cannot be reused once they were originally donated. Bio medical waste can be liquid or solid, such as blood waste or extracted body fluids.
Where should you be using incineration?
This procedure is required in all hospitals, including military hospitals. However, recent studies have shown that the disposal system used in field hospitals is often sub-optimal and far below the standards of traditional hospitals. Sometimes this can be due to a lack of guidance and resources or because a military hospital is in a war zone.
| Brand | Rram Business Corp. |
| Usage | Bio Medical industry |
| Type of Incinerator | Hospital Waste Incinerator |
| Power Source | Diesel |
| Capacity | 40 kg/batch |
| Burning Ability | 300 Kg/time |
| Average Burn Out Time | 3 Hrs |
| Material | Stainless Steel |
| Control Panel | Automatic |
| SR. No. | Specification of Incinerator | Details |
| 1 | Brand Type and Model | Hygiene N Human |
| 2 | Type of waste | Bio Medical waste |
| 3 | Burning Capacity | 40 Kg/hr. |
| 4 | Mode of heating | Oil – Diesel |
| 5 | Feeding | Manual |
| . | . | . |
| SR. No. | Primary Chamber | Details |
| 1 | Type | Static |
| 2 | Material of construction | M.S- 5mm |
| 3 | Ignition | Automatic |
| 4 | Temperature Control | Automatic |
| 5 | Inside Temperature | Min 850 C |
| 6 | Temperature Sensor | Thermocouple CR/ AL |
| 7 | Inside | IS-8-1994 High Alumina Refractory Bricks 70% with insulation brick IS 2042-2006 |
| 8 | Air Regulation system | Provided |
| 9 | Outer Temperature of Body | Up to 45 C |
| 10 | Final Finish | Heat Resistance Paint |
| 11 | View Port | Provided |
| 12 | Burner | 01 No’s |
| . | . | . |
| SR. No. | Secondary Chamber | Details |
| 1 | Type | Static |
| 2 | Material of construction | M.S – 5mm |
| 3 | Inside | IS-8-1994 High Alumina Refractory Brick with insulation brick IS 2042-2006 & 128 Density ceramic blanket |
| 4 | Inside Temperature | Mini 1050 C |
| 5 | Oil Residence Time | >2Sec |
| 6 | Temperature Sensor | Thermocouple CR/ AL |
| 7 | Outer Temperature of Body | UP to 45C |
| 8 | Final Finish | Heat Resistance Paint |
| 9 | Air Regulation System | Provided |
| 10 | Burner | 01 No’s |
| . | . | . |
| SR. No. | Combustion Fan | Details |
| 1 | Type | Centrifugal |
| 2 | Modulation | Provided |
| 3 | Material of construction | Mild Sheet |
| 4 | Drive | Direct |
| . | . | . |
| SR. No. | Emergency Stack | Details |
| 1 | Material of construction | M.S |
| 2 | Refractory | Provided |
| SR. No. | Air Pollution Control Device – Device Scrubber | Details |
| 1 | Type | Venturi scrubber high pressure jet |
| 2 | Material of Construction | SS316L |
| 3 | Temperature at the outlet | >80C |
| 4 | Scrubbing media | PH modified water (Caustic Soda) |
| . | . | . |
| SR. No. | Re-Circulation PUMP for Venturi Scrubber | Details |
| 1 | Type | Centrifugal |
| 2 | Material Of construction | SS 304 |
| 3 | Piping | SS 304 |
| . | . | . |
| SR. No. | Droplet Separator & Re-Circulation Tank (Integral) | Details |
| 1 | Type | Cyclonic |
| 2 | Application | To Remove Moisture |
| 3 | MOC | SS 316 L |
| 4 | Recirculation Tank MOC | M S 3mm thick with FRP Lining |
| 5 | Water inlet & outlet Valve | Provided |
| . | . | . |
| SR. No. | I.D. Fan | Details |
| 1 | Type | Centrifugal |
| 2 | MOC | M. S |
| 3 | Drive | Belt Driven |
| . | . | . |
| SR. No. | Toxic Gases Arrester | Details |
| 1 | Toxic Gases Arrester | Provided |
| . | . | . |
| SR. No. | Control Panel | Details |
| 1 | Type | PLC HMI |
| 2 | MOC | Mild Stee |
| 3 | Type of Temperature control | Digital |
| 4 | Finish and painting Type | Powder Coated |
| 5 | Auto cut of Burners/Heaters | Provided |
| 6 | Emergency Stop | Provided |
| . | . | . |
| SR. No. | Chimney Height | Details |
| 1 | MOC | M.S |
| 2 | Height | 30 Mtr from ground level |
| 3 | Type | Self-supported base with additional guy wire support |
| 4 | Paint | Heat Proof |
| 5 | Other Standard Accessories | Sampling port, sampling platform etc. |
| 6 | Ladder | Till the sampling port |